{
    "additional_cooling_fan_speed": [
        "5"
    ],
    "close_fan_the_first_x_layers": [
        "2"
    ],
    "cool_plate_temp": [
        "0"
    ],
    "cool_plate_temp_initial_layer": [
        "0"
    ],
    "default_filament_colour": [
        "#000000"
    ],
    "enable_pressure_advance": [
        "1"
    ],
    "eng_plate_temp": [
        "35"
    ],
    "eng_plate_temp_initial_layer": [
        "35"
    ],
    "filament_cost": [
        "48.99"
    ],
    "filament_density": [
        "1.19"
    ],
    "filament_deretraction_speed": [
        "15"
    ],
    "filament_flow_ratio": [
        "1.19"
    ],
    "filament_long_retractions_when_cut": [
        "0"
    ],
    "filament_max_volumetric_speed": [
        "1.65"
    ],
    "filament_retract_when_changing_layer": [
        "1"
    ],
    "filament_retraction_length": [
        "2.2"
    ],
    "filament_retraction_minimum_travel": [
        "2"
    ],
    "filament_retraction_speed": [
        "45"
    ],
    "filament_settings_id": [
        "NinjaFlex TPU 85A"
    ],
    "filament_type": [
        "TPU"
    ],
    "filament_vendor": [
        "NinjaTek"
    ],
    "filament_wipe": [
        "0"
    ],
    "filament_z_hop": [
        "0"
    ],
    "filament_z_hop_types": [
        "Slope Lift"
    ],
    "from": "User",
    "hot_plate_temp": [
        "45"
    ],
    "hot_plate_temp_initial_layer": [
        "45"
    ],
    "inherits": "Bambu PLA Basic @BBL X1C",
    "is_custom_defined": "0",
    "name": "NinjaFlex TPU 85A",
    "nozzle_temperature": [
        "245"
    ],
    "nozzle_temperature_initial_layer": [
        "245"
    ],
    "nozzle_temperature_range_high": [
        "250"
    ],
    "nozzle_temperature_range_low": [
        "240"
    ],
    "overhang_fan_threshold": [
        "95%"
    ],
    "pressure_advance": [
        "0.06"
    ],
    "slow_down_layer_time": [
        "6"
    ],
    "slow_down_min_speed": [
        "10"
    ],
    "temperature_vitrification": [
        "60"
    ],
    "textured_plate_temp": [
        "45"
    ],
    "textured_plate_temp_initial_layer": [
        "45"
    ],
    "version": "1.7.0.10"
}